Put Legs On Malm Dresser. Lately, the malm dresser has been gaining a lot of attention in the media as being highly transformative. I made a frame out of the furring strips that i screwed into the inside lining of the bottom of the dresser.
There larger 6 drawer dresser. Using 2″ x 2″ “furring strips” from home depot. Since the material on a malm chest is relatively weak and thin, you would need to add some timber to the base to allow you to fix the legs to it.
Table of Contents
With Those Pieces I Just Used A Hammer To Pry The Base Off.
Using 2 x 2 furring strips from home. A final addition of a strip of wood across the bottom is a small tweak that actually transforms the look of the dresser brilliantly. I'm so happy with the ones that i ended up purchasing, but they were both pricey and i.
Enter Maximum Price Shipping Free Shipping.
Next, turn the dresser upside down. Next, lift the dresser and put the feet under it. To attach the knobs to the malm dresser, use a cabinet mounting template ( like this) and measure top to bottom and side to side to make sure that the holes are aligned.
Since The Bottom Of The Ikea Malm Dresser Is Open, First We Need To Add Support Pieces To The Underside Of The Dresser That The Legs Can Attach To.
Can you put legs on a malm dresser? Similarly, can you put handles on a malm dresser? Add legs to malm dresser.
I Made A Frame Out Of The Furring Strips That I Screwed Into The Inside Lining Of The Bottom Of The Dresser.
If you are putting your unit over a radiator as i did, you may want to put your back legs forward a little more to make sure they don’t touch your radiator. Yes you can, but you do need to do some work before you can do this on this ikea dresser hack. I added a couple of 1×4’s to the dresser and attached the leg brackets to the wood.
To Attach The Knobs To The Malm Dresser, Use A Cabinet Mounting Template (Like This) And Measure Top To Bottom And Side To Side To Make Sure That The Holes Are Aligned.
The malm dresser from ikea has a frame underneath, but unfortunately not all the way around (please see attached picture). I added wood glue and clamped ’em down and let them sit for 24 hours. It can be tricky, and it s.