How To Read Gas Meter And Calculate. The volume (read on the meter) is multiplied by the mean value of the energy potential of the gas during the period in question. Here follows a few rules on how to read a dial gas meter:

When reading a gas meter, read and write down the numbers as shown on the dials from left to right (opposite of an electric meter). Black digits on sui gas meter show gas consumed in cubic meters (m3). To find out the amount of gas used in your home, record your meter reading at the start of your billing period and subtract the number from the meter reading at the end of your billing period.

Table of Contents

Take Your Last Reading And Subtract How Many Units You Have So Far.

If your measure is in cubic feet, multiply by 2.83 to convert to meters. Choose what suits you best. The volume (read on the meter) is multiplied by the mean value of the energy potential of the gas during the period in question.

Put This Number Nmarginate By 3.6.

We have two ways you can submit your own natural gas meter reading. Your gas reading, in cubic metres (m3) will appear. The gas company takes all that information and uses it to calculate your gas bill.

Then, Record The Numbers On The Rest Of The Dials The Same Way, Working From Left To Right.

Readings are taken then converted to kilowatt hours (kwh) for billing purposes. Written by noah march 17, 2022 in order to calculate your gas bill, multiply the number of therms used up to the current billing period by the current btu factors, plus the current ccf* use. Most gas companies read your meter electronically now.

Furthermore, Ignore Any Red Dials And Ensure You Read All Other Dials From Left To Right.

Multiply by calorific value (40.0). Read each dial from left to right, ignoring any dials in red, the large dial and also any that are marked up as “100 per rev” if the dial hand/pointer is resting between two numbers, always go with the lower number; Press 9 on the keypad.

The Word “Volume” Will Show On The Screen.

If you have your meter readings to hand, then enter your data into the gas bill calculator below to estimate your next bill. To take an export reading from a secure smets1 smart meter do the following: For example, it may read 17.225, which equals 1,722.5 cubic metres.