How To Make Your Own Ice Fishing Sled. Slide a 8.5″ 4×4 down the pipe (outlined in orange) add a flat bracket to connect the 8.5″ and 36″ 4x4s (arrow #1). Here are the pics i have so far on my modification.
Broken sleds also won’t function at their optimal level. Bernier) by le fabshop in toys & games How to build an ice fishing sled, aka smitty sled®.
Table of Contents
You Can Rip A 2 X 4 In Half For This If Desired.
The sled is easy to build with these most common proportions: I first started out by bolting the 2 side supports to the sled. How to build an ice fishing sled, aka smitty sled®.
My 2 Man Eskimo Portable Sled Shack Can Be Pulled Around With Ease Fully Loaded.
$20 in materials using $10 used skis from goodwill. Make sure to think about how big you want the sleigh to be. This will reduce impact on the caboose connection.
Z Jackal Has Uploaded 475 Photos To Flickr.
Measure the amount of available space in your freezer. Use either pvc or plumbers glue to ensure a secure hold. Use a lot of long screws to attach skis to the 2 by 12's i used like 2.5 inchers and i am guessing i will need to sink a few more longer ones in there.
Try To Find A Box With Similar Dimensions.
Find a cardboard box to use as a mold for your ice sled. The pull sled was built with walking in mind when a wheeler or snowmobile would not be an option. Two 2 x 4 inches wood cut at a 45° angle for the front and two 2 x 6 pieces of wood, both at six inches long for the back.
We Have A Hdmp Welder At Work Which I Used To Weld The Sled Back Together.
Bernier) by le fabshop in toys & games Add a 90 degree bracket between the 8.5″ and angled 24″ 4x4s (arrow #2). Keep water shallow and make a point of tying your sled to something nearby.